Ikea Lack Table 3D Printer

Ikea Lack Table 3D Printer. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Coolste Ikea Lack 3d Printer Enclosure How To Make Your Own All3dp

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. . But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. .. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood... But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. . Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. . Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood.. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. . Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... .. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood.. .. But it was easy enough since the lack table is barely wood.

Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.. But it was easy enough since the lack table is barely wood.

But it was easy enough since the lack table is barely wood. But it was easy enough since the lack table is barely wood. Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes... Simply use a 1 inch hole saw to drill the hole for it to pass through, i had to shave the hole in the table a little bit with an exacto to make it fit since apparently 1 inch hole saws don't make 1 inch holes.